Description
This is a 3.5 Ton 208/220 Volts 1-Phase Direct Factory Replacement Copeland Scroll Compressor. The Copeland Model # is ZR42K5E-PFV-800. It is rated at 42,200 BTU.In some instances, small piping changes may be required. Thanks for looking and good luck!
This compressor is designed to replace old Copeland numbers: ZR40K3-PFV-260 ZR40K3-PFV-830 ZR40K3-PFV-930
TECHNICAL SPECIFICATIONS
Capacity (BTU/HR): 42200
Type: Scroll
Refrigerant: R-22
Input Voltage (V): 208
Input Voltage (V): 230
Number Of Phases: 1
Frequency (Hz.): 50
Frequency (Hz.): 60
Run Capacitor (uF/V): 55/370
Start Capacitor (uF/V): 88-106/330
Rated Load Current (A): 22.1
Maximum Continuous Current (A): 31.0
Locked Rotor Current (A): 104.0
Crankcase Heater Included?: No
Suction Line Location: 2
Suction Line Height (Inches): 11-1/8
Suction Line Configuration: Stub Out
Suction Line Size (Inches): 7/8
Discharge Line Location: 3
Discharge Line Height (Inches): 15-3/8
Discharge Line Configuration: Stub Out
Discharge Line Size (Inches): 1/2
Overall Compressor Height (Inches): 16-7/16
Mounting Base Dimensions (Inches X Inches): 7-1/2 x 7-1/2.
To install a Compressor PROPERLY you need to have AND use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. All Sales are Final! There are NO WARRANTIES! Compressors Should be installed by a qualified Heating Air Conditioning Tech.
This compressor is designed to replace old Copeland numbers: ZR40K3-PFV-260 ZR40K3-PFV-830 ZR40K3-PFV-930
TECHNICAL SPECIFICATIONS
Capacity (BTU/HR): 42200
Type: Scroll
Refrigerant: R-22
Input Voltage (V): 208
Input Voltage (V): 230
Number Of Phases: 1
Frequency (Hz.): 50
Frequency (Hz.): 60
Run Capacitor (uF/V): 55/370
Start Capacitor (uF/V): 88-106/330
Rated Load Current (A): 22.1
Maximum Continuous Current (A): 31.0
Locked Rotor Current (A): 104.0
Crankcase Heater Included?: No
Suction Line Location: 2
Suction Line Height (Inches): 11-1/8
Suction Line Configuration: Stub Out
Suction Line Size (Inches): 7/8
Discharge Line Location: 3
Discharge Line Height (Inches): 15-3/8
Discharge Line Configuration: Stub Out
Discharge Line Size (Inches): 1/2
Overall Compressor Height (Inches): 16-7/16
Mounting Base Dimensions (Inches X Inches): 7-1/2 x 7-1/2.
To install a Compressor PROPERLY you need to have AND use the proper equipment and use proper installation technique. If you are not familiar with these techniques or you do not have the proper equipment then you SHOULD have a qualified HVAC tech to install your new compressor. All Sales are Final! There are NO WARRANTIES! Compressors Should be installed by a qualified Heating Air Conditioning Tech.
Function:
Compressors compress refrigerants (freon) from a gas state into a liquid state and then pump it through the freon lines.
Replaces Old Part #s:
Repair Difficulty Level:
Partial List of Units that Use This Item:
Hit Ctrl+F and enter your model number for a quick search!